The right way to Manually Drain a Washing Machine in 2022

💧 The right way to Manually Drain a Washing Machine

Have you ever obtained a clogged washer that must be drained as quickly as potential?

As an alternative of ready for somebody to repair it for you, right here’s some recommendation on how one can drain your machine your self.

Don’t fear if you happen to’re a newbie as a result of we’ll clarify the whole lot clearly in order that anybody can perceive.

So, right here’s our information on how one can drain a washer manually, offered in easy-to-follow steps.

💧 What Can Trigger a Clogged Drain?

Plumber cleaning washing machine filter

There are just a few methods issues along with your drain pump and the inner elements of your machine can result in a clogged drain.

Most points come from issues getting caught within the drain pump.

Whether or not it’s a buildup of lint or cotton, or perhaps a full article of clothes, your washing can rapidly trigger a drain pump clog that may take ages to empty correctly.

Issues along with your drain pipe or drain pump filter can even trigger clogging.

A easy dent in your drain pipe will be sufficient to cease a standard water drain.

Lastly, a faulty lid change could possibly be inflicting issues.

In lots of machines, the lid change should lock to let the washer drain.

Make sure the lid change is practical and in place earlier than shifting on to the following steps.

💧 Prime-Loading Washing Machine vs. Entrance-Loading Machine

How to Manually Drain a Washing Machine: woman with front loading washing machine

The technique that you just use to empty a washer depends upon what sort of machine you’ve got.

Because the names counsel, top-loading washing machines are crammed from the highest, whereas front-loading machines are loaded from the entrance.

Although this will appear apparent, however there’s an important consequence of this design that must be addressed.

Most front-loading machines drain from the bottom-right nook of the machine, whereas a front-load washer usually drains from the again.

This modifications how the machines drain, so that you’ll must test your machine to see what sort you’ve got earlier than persevering with.

You may additionally should tip your machine ahead or your machine backward to entry the drain pump if in case you have a top-loading washer.

🛑 NOTE: If so, be extraordinarily cautious with the machine as a result of it is vitally heavy and might trigger serious injuries if it falls on you.

💧 Steps to Manually Draining a Washing Machine

plumber with a washing machine

Steps to Manually Draining a Washing Machine

Flip Off The Water Provide

washing machine water connections

To begin off, you might want to flip off the water provide to forestall drain water from spilling out of the machine whereas engaged on it.

To shut the shut-off valves, first, find them close to the wall behind the washer.

They’re usually small levers or handles that management the movement of water to the machine.

After getting situated the shut-off valves, use your fingers or a wrench to show them clockwise till they’re within the “closed” place.

Unplug the Washing Machine From the Wall Outlet

unplugged washing machine

One other security precaution earlier than we get began.

It will be sure that the machine received’t begin operating while you’re engaged on it, which might in any other case offer you an electrical shock.

Place a Giant Bucket Beneath the Drain Hose

To catch any water which may leak out, we’re going to position a bucket beneath the drain hose.

The washer drain hose is the versatile tube that carries water out of the washer when it’s drained.

You will discover it behind a high load washer or behind an entry panel within the backside proper for a entrance loading washer.

Subsequent to the drain hose, there can be one other two hoses: one for warm water and the opposite for chilly water.

To cease any extra water from getting on you whilst you’re working, you must flip the recent water and chilly water hoses off.

Collect a big bucket or tub that’s large enough to carry the water that may come out of the drain hose.

For front-load washers, you’ll want to make use of a shallow container for this step.

It is because there almost certainly isn’t sufficient area for a deep container, so solely a protracted, shallow container will truly allow you to gather sufficient water.

After getting your bucket or tub prepared, fastidiously place it immediately beneath.

It will make sure the water flows immediately into it when the machine is drained.

Take care to empty the bucket or tub periodically whereas draining, as this may stop it from overflowing.

Use a Wrench to Loosen the Hose Clamp

Now we have to loosen the hose clamp that secures the drain hose to the washer.

The hose clamp is a small, adjustable band that wraps across the drain hose and holds it in place.

The hose clamp will be discovered on the tip of the hose.

When you’ve situated it, use a wrench to loosen the bolt or screw that secures it in place.

This can be tough, because the hose clamp is usually tightened very securely to forestall the drain hose from coming unfastened.

As soon as the hose clamp is loosened, fastidiously slide it alongside the size of the drain hose till it falls off.

Fastidiously Take away the Drain Hose From the Washing Machine

washing machine drain hose

Fastidiously take away the drain hose from the washer.

This can be a pretty simple step.

Take away the drain hose from the machine and place the tip of the hose into the bucket you simply obtained prepared earlier.

Take the tip of the drain hose, fastidiously seize it with each palms and gently pull it away from the washer.

Watch out to not yank on the hose or tug it too laborious, as this might trigger it to come back out of the machine fully and result in water spilling all over the place.

As soon as the drain hose is free from the machine, fastidiously decrease the tip of the hose into the bucket.

Make it possible for the tip of the hose is totally submerged within the bucket earlier than you start draining water from the washer.

Preserve the tip of the drain hose beneath the water all through the draining course of, so the water flows easily.

Drain the Washing Machine

Now it’s motion time. Or slightly inaction time.

First, be sure that the drain hose’s finish remains to be submerged within the bucket.

Then, the water ought to simply movement itself into the bucket.

All you must do now could be wait till you’ve fully drained all of the standing water from the machine.

As we mentioned earlier, emptying the bucket periodically whereas draining is an excellent thought, as this may stop the bucket from overfilling.

Be certain water isn’t flowing out whilst you change the bucket, otherwise you’ll likely run into spillage issues!

You must also hold a watch out for build-ups within the drain hose, otherwise you may find yourself with a clogged drain hose.

Watching the water movement coming from the hose can assist you monitor for a possible drain hose clog.

As soon as all of the standing water is gone, you may transfer on to the following step.

Fastidiously Reattach the Drain Hose to the Washing Machine and Tighten the Hose Clamp.

Now that every one the water is lastly drained out of the machine, we’ve obtained to get the whole lot set once more.

To begin, we’ll fastidiously reattach the drain hose to the washer and tighten the hose clamp.

To reattach the drain hose, first fastidiously put the tip of the hose again in its authentic location.

As soon as it’s in place, fastidiously slide the hose clamp again over the tip of the hose and place it in order that it’s safe.

With the hose clamp in place, use a wrench to tighten the bolt or screw that secures it.

You should definitely tighten the hose clamp securely, however keep away from tightening it too tightly, as this might harm the hose or the washer.

You will need to double-check that the hose is securely connected and the hose clamp is tightened correctly to forestall leaks or spills.

When you’ve checked all this and made positive the whole lot’s prepared, There’s just one extra step!

Flip the Water Provide Again On and Plug the Washing Machine In.

Washing machine hoses

When you’ve checked all this and made positive the whole lot’s prepared, There’s just one extra step!

Flip the water provide again on and plug the washer again in.

We’re practically completed! All you must do now could be flip the water provide again on and plug the washer again in.

Test the wall behind the machine for the shut-off valves to show the water provide again on.

These management the movement of water to the washer, so logically you might want to have them on for the machine to work.

Use your fingers or a wrench to show them counter-clockwise till they’re within the “open” place.

Subsequent, you’ll clearly must plug the facility twine again into the wall outlet.

Don’t overlook to be sure you’ve truly plugged them in, otherwise you may need an embarrassing accident.

As soon as the water provide is turned on, and the washer is plugged in, the whole lot is able to go.


  • 1 5 Gallon Bucket
  • Needle Nostril Pliers
  • Plumbers Snake or Auger
  • Screwdriver
  • Shallow bucket for Entrance Loading Machines
  • Producers Guide (In case you have one)

Supplies: Towels for the mess

💧 Closing Ideas

kid with a cape in laundry room

No extra must worry your dreaded washer!

With the usage of these steps, it is possible for you to to manually drain a washer and put the whole lot again in place once more.

Nevertheless, you should still not be assured in coping with washer clogs.

It’s completely affordable to be uncomfortable working along with your electrical system and the numerous costly elements of your machine.

Fortuitously, Phyxter Dwelling Companies is right here that will help you.

We provide knowledgeable plumbing repairs all through North America for every kind of plumbing points and different repairs.

Need to study extra about your property’s plumbing system? Be happy to take a look at our different plumbing articles.