Simple Hack to Dangle Artwork Completely Straight | Thrifty Decor Chick

Dangle artwork simply with this painter’s tape hack!

For those who’ve ever struggled hanging artwork or mirrors with multiple hook on the again, this useful little trick is for you!

We have all been there — if you aren’t getting the holes drilled completely within the wall, all the things is wonky.

That is particularly useful on bigger gadgets which have a protracted expanse between the hooks, longer than a typical 24 inch stage.

It is also good while you’re attempting to hold heavy gadgets like mirrors. Lifting it time and again to seek out that your holes aren’t completely spaced is a significant ache:

It might even be GREAT for a gallery wall while you’re utilizing the identical sort of body time and again. The hooks ought to be the identical distance on every body. 😉

I first used this simple artwork hanging trick years in the past once I was reworking our son’s rest room. I bought these IKEA mirrors for the toilet renovation:

This publish might comprise affiliate hyperlinks in your comfort.

I could earn a small fee when you make a purchase order by means of hyperlinks.

They’re the Stockholm mirrors and are so fairly! I nonetheless hope to make use of one in all these once more in our present house!

They’re fairly massive so the holes on the again had been far aside. You should utilize a stage, however most are 24 inches or shorter. Regardless that we have now a 4 foot stage, I discovered this trick to be far more exact than measuring and attempting to switch that measurement onto the wall.

As a result of I used to be drilling into tile I needed this to be as precise as potential. This little hack is fairly simple.

You may must seize some painter’s tape (or any masking tape) and place it throughout the holes on the again of your artwork or mirror:

Art or mirror hanging trick with painter's tape

This publish might comprise affiliate hyperlinks in your comfort.

Be sure the tape is positioned on the similar spot on both sides. (That means the identical distance from the highest of the tape.) Then I poked a gap by means of the painter’s tape:

You too can mark it with a pen for a actually exact measurement.

Subsequent, peel off your tape and place it the place you need on the wall. You may nonetheless want a level for this half, however the good factor is sort of any stage will work. You do not want a brilliant lengthy one to verify how stage your tape is.

Maintain it in opposition to the tape to verify. Regulate the tape accordingly:

You then simply drill, utilizing your marks as a information!

For those who’re drilling proper into drywall or wooden, you may simply want a screw or nail for lighter artwork, or anchors for heavier gadgets. These screw in anchors save a ton of time!

On this specific mission, I needed to drill into tile, which is at all times nerve-racking! When drilling into tile it’s essential to use a bit particularly for this job — this tile and glass drill bit set is what I’ve.

I like that they embody 4 totally different sizes:

It takes awhile to get by means of the tile — you may want some endurance and a totally charged drill. 😉

Then you may insert your anchors or screws and cling your merchandise! Take care and be affected person when screwing into tile, even after the opening has been added.

Once more, I’ve at all times measured with tape or a stage however I discovered this to be far more exact. I wasn’t going to fiddle with this tile!: