Learn how to Replace Primary Cupboards With DIY Furnishings Toes

Learn how to add ornamental furnishings ft to cupboard toe kicks with this DIY hack!

I’ve made so many small updates to our kitchen over time, and this straightforward
DIY element is one in all my favorites!

I like the look of furnishings ft on rest room and kitchen cupboards — they add
a customized contact and make them look a lot dearer.

Years in the past I got here up with this hack to make them for a lot much less, however by no means
applied it. After I added trim to our finish cupboard panels, I knew it
could be an ideal time strive it out! I used to be
left with a straight edge on the perimeters of the cupboards that made this even simpler to implement.

You may also add these ornamental “ft” the place your cupboards meet a wall or
one other cupboard.

As a substitute of shopping for costly ft for the cupboards, or jigsawing them out of
wooden (the jigsaw is my least favourite software…I keep away from it at prices 😂), I made
some simple adjustments to those wooden corbels:

This put up could include affiliate hyperlinks on your comfort.

I’ll earn a small fee when you make a purchase order by hyperlinks.

Yow will discover them at most {hardware} shops,
I found my corbels at Home Depot.

All I needed to do was reduce them right down to the peak of our kitchen cupboards. Extra
particularly, the peak of the toe kick.

I marked that measurement on the underside of the corbel and reduce it down with a
miter noticed. Then I gave them just a few coats of the cupboard paint colour with gentle
sandings in between:

I took a door to the paint retailer to get a colour matched to our
cupboards.

Do you see my imaginative and prescient right here? They’re now cupboard “ft!”

This might be be a brilliant fast undertaking — simply portray and
attaching the corbels. However I did one further step that added a little bit
time.

I needed to ensure no crumbs might get again behind them (it could be
a ache to scrub again there), so I added a block of wooden that closes it
off.

I reduce items of scrap wooden the depth of the open house behind the
corbels, after which painted one facet the cupboard colour:

Then I hooked up it to the bottom of the cupboards with a nail gun:

Wooden glue or Liquid Nails would work as effectively (so long as you haven’t any
plan to take away them!). I checked the spacing earlier than nailing it in —
ensuring the depth of those again items had been proper on so the brand new ft
would meet up with the cupboards completely.

This little addition prevents crumbs from getting behind them, and it
allowed me to safe them much more by nailing into that from the
entrance.

As a result of I did this I needed to reduce down the quarter spherical, nevertheless it was
value it!

To safe them I nailed from the facet (the place I might), from the highest
by the cupboard (proper up towards the lip of the cupboard, so you possibly can’t
even see the nail holes) and thru that little stopper piece from the
entrance.

They are not going anyplace!:

You may solely see the place they meet up with the cupboard if the doorways are
open, so I did not add any ornamental trim alongside the underside to cover that
seam.

This is a view of the facet of the cupboard (with the brand new trim) and the DIY
ft:

I am thrilled with how they turned out! They add one other element to the
kitchen that does not scream at you, however does improve the entire look of the
house.

These little initiatives layer on each other and are including a whole lot of
character to our kitchen!:

I initially deliberate to place a set underneath the cupboards the place our stovetop
is, however I did not need it to get too busy. I should do it, as a result of I
love how they give the impression of being!

For now I simply went with the ends of the lengthy set of cupboards:

I researched a ton of kitchens which have cupboard ft they usually vary from
this less complicated appear like this (simply on the ends) to every cupboard having a
set — so something goes.

It simply is determined by your desire!

I’ve additionally added these ft to a couple extra areas in our dwelling — however I
gave them a extra trendy look by slicing off each detailed ends of
the corbels.

I solely spent $40 on this undertaking! In case you are expert with a jigsaw you
might make them for even cheaper. I most well-liked the thickness of those to
what I might do by myself. This technique is MUCH faster too.

You would nonetheless do that when you’ve got the usual toe kick on the finish of
your cupboards, however you will both have an area behind them you’d see from
the facet otherwise you’ll need to add a again to them that closes off that space,
if that is smart.

You probably have any questions let me know! I simply love these DIY cupboard ft
and the softer contact it provides to our kitchen! There are a whole lot of arduous traces
in right here and I needed so as to add some fairly, softer particulars.